[pacman-dev] Remove autotools support

This removes support for autotools in favour of meson.
---

I'd still like support for including man pages (with --prefix=/usr) when
running "ninja dist".  However, I am also happy taking the heavy handed approach of adding the built man pages to git if no solution is forthcoming.

There is probably some .gitignore cleanup that can be done in the translation
directories.

 .gitignore                    |  21 --
 .gitlab-ci.yml                |  17 -
 HACKING                       |  13 -
 INSTALL                       | 370 ---------------------
 Makefile.am                   |  78 -----
 RELEASE                       |   9 +-
 configure.ac                  | 594 ----------------------------------
 doc/Makefile.am               | 162 ----------
 doc/index.asciidoc            |   8 +-
 etc/Makefile.am               |  27 --
 lib/libalpm/Makefile.am       |  78 -----
 scripts/Makefile.am           | 287 ----------------
 src/common/Makefile.am        |   3 -
 src/pacman/Makefile.am        |  69 ----
 src/util/Makefile.am          |  27 --
 test/pacman/Makefile.am       |  22 --
 test/pacman/tests/Makefile.am |   5 -
 test/scripts/Makefile.am      |  10 -
 test/util/Makefile.am         |   8 -
 19 files changed, 8 insertions(+), 1800 deletions(-)
 delete mode 100644 INSTALL
 delete mode 100644 Makefile.am
 delete mode 100644 configure.ac
 delete mode 100644 doc/Makefile.am
 delete mode 100644 etc/Makefile.am
 delete mode 100644 lib/libalpm/Makefile.am
 delete mode 100644 scripts/Makefile.am
 delete mode 100644 src/common/Makefile.am
 delete mode 100644 src/pacman/Makefile.am
 delete mode 100644 src/util/Makefile.am
 delete mode 100644 test/pacman/Makefile.am
 delete mode 100644 test/pacman/tests/Makefile.am
 delete mode 100644 test/scripts/Makefile.am
 delete mode 100644 test/util/Makefile.am

On Sun, May 10, 2020 at 8:09 PM Allan McRae <allan@archlinux.org> wrote:
>
> This removes support for autotools in favour of meson.
> ---
>
> I'd still like support for including man pages (with --prefix=/usr) when
> running "ninja dist".  However, I am also happy taking the heavy handed approach of adding the built man pages to git if no solution is forthcoming.
>
> There is probably some .gitignore cleanup that can be done in the translation
> directories.
>
>  .gitignore                    |  21 --
>  .gitlab-ci.yml                |  17 -
>  HACKING                       |  13 -
>  INSTALL                       | 370 ---------------------
>  Makefile.am                   |  78 -----
>  RELEASE                       |   9 +-
>  configure.ac                  | 594 ----------------------------------
>  doc/Makefile.am               | 162 ----------
>  doc/index.asciidoc            |   8 +-
>  etc/Makefile.am               |  27 --
>  lib/libalpm/Makefile.am       |  78 -----
>  scripts/Makefile.am           | 287 ----------------
>  src/common/Makefile.am        |   3 -
>  src/pacman/Makefile.am        |  69 ----
>  src/util/Makefile.am          |  27 --
>  test/pacman/Makefile.am       |  22 --
>  test/pacman/tests/Makefile.am |   5 -
>  test/scripts/Makefile.am      |  10 -
>  test/util/Makefile.am         |   8 -
>  19 files changed, 8 insertions(+), 1800 deletions(-)
>  delete mode 100644 INSTALL
>  delete mode 100644 Makefile.am
>  delete mode 100644 configure.ac
>  delete mode 100644 doc/Makefile.am
>  delete mode 100644 etc/Makefile.am
>  delete mode 100644 lib/libalpm/Makefile.am
>  delete mode 100644 scripts/Makefile.am
>  delete mode 100644 src/common/Makefile.am
>  delete mode 100644 src/pacman/Makefile.am
>  delete mode 100644 src/util/Makefile.am
>  delete mode 100644 test/pacman/Makefile.am
>  delete mode 100644 test/pacman/tests/Makefile.am
>  delete mode 100644 test/scripts/Makefile.am
>  delete mode 100644 test/util/Makefile.am
>
> diff --git a/.gitignore b/.gitignore
> index 499d499b..01975fd2 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -1,24 +1,3 @@
>  *~
>  *.o
> -ABOUT-NLS
> -aclocal.m4
> -autom4te.cache
> -config.h
> -config.h.in
> -config.log
> -config.status
> -config.status.lineno
> -configure
> -configure.lineno
> -cov-int
> -cscope.in.out
> -cscope.out
> -cscope.po.out
> -intl
> -libtool
> -Makefile
> -Makefile.in
>  pacman-*.tar.gz
> -root
> -stamp-h1
> -tags
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index a53d60cf..65b8c729 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -34,23 +34,6 @@ arch-docs:
>      - meson -Ddoc=enabled build
>      - ninja -C build
>
> -arch-autoconf:
> -  extends: .arch-test
> -  script:
> -    - pacman -Syu --needed --noconfirm autoconf-archive
> -    - autoreconf -i
> -    - ./configure --enable-warningflags --disable-doc
> -    - make
> -    - fakechroot make check
> -
> -arch-distcheck:
> -  extends: .arch-test
> -  script:
> -    - pacman -Syu --needed --noconfirm autoconf-archive asciidoc
> -    - autoreconf -i
> -    - ./configure --enable-warningflags
> -    - fakechroot make distcheck
> -
>  arch-clang:
>    extends: .arch-test
>    script:
> diff --git a/HACKING b/HACKING
> index 009a4682..334b7ac0 100644
> --- a/HACKING
> +++ b/HACKING
> @@ -176,16 +176,3 @@ For pacman:
>  -------------------------------------------
>
>  Never directly include config.h. This will always be added via Makefiles.
> -
> -GDB and Valgrind Usage
> -~~~~~~~~~~~~~~~~~~~~~~
> -
> -When using GDB or valgrind on pacman, you will want to run it on the actual
> -binary rather than the shell script wrapper produced by libtool. The actual
> -binary lives at `src/pacman/.libs/lt-pacman`, and will exist after running
> -`./src/pacman/pacman` at least once.
> -
> -For example, to run valgrind:
> -
> -    ./src/pacman/pacman
> -    valgrind --leak-check=full -- src/pacman/.libs/lt-pacman -Syu
> diff --git a/INSTALL b/INSTALL
> deleted file mode 100644
> index 007e9396..00000000
> --- a/INSTALL
> +++ /dev/null
> @@ -1,370 +0,0 @@
> -Installation Instructions
> -*************************
> -
> -Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
> -Inc.
> -
> -   Copying and distribution of this file, with or without modification,
> -are permitted in any medium without royalty provided the copyright
> -notice and this notice are preserved.  This file is offered as-is,
> -without warranty of any kind.
> -
> -Basic Installation
> -==================
> -
> -   Briefly, the shell commands `./configure; make; make install' should
> -configure, build, and install this package.  The following
> -more-detailed instructions are generic; see the `README' file for
> -instructions specific to this package.  Some packages provide this
> -`INSTALL' file but do not implement all of the features documented
> -below.  The lack of an optional feature in a given package is not
> -necessarily a bug.  More recommendations for GNU packages can be found
> -in *note Makefile Conventions: (standards)Makefile Conventions.
> -
> -   The `configure' shell script attempts to guess correct values for
> -various system-dependent variables used during compilation.  It uses
> -those values to create a `Makefile' in each directory of the package.
> -It may also create one or more `.h' files containing system-dependent
> -definitions.  Finally, it creates a shell script `config.status' that
> -you can run in the future to recreate the current configuration, and a
> -file `config.log' containing compiler output (useful mainly for
> -debugging `configure').
> -
> -   It can also use an optional file (typically called `config.cache'
> -and enabled with `--cache-file=config.cache' or simply `-C') that saves
> -the results of its tests to speed up reconfiguring.  Caching is
> -disabled by default to prevent problems with accidental use of stale
> -cache files.
> -
> -   If you need to do unusual things to compile the package, please try
> -to figure out how `configure' could check whether to do them, and mail
> -diffs or instructions to the address given in the `README' so they can
> -be considered for the next release.  If you are using the cache, and at
> -some point `config.cache' contains results you don't want to keep, you
> -may remove or edit it.
> -
> -   The file `configure.ac' (or `configure.in') is used to create
> -`configure' by a program called `autoconf'.  You need `configure.ac' if
> -you want to change it or regenerate `configure' using a newer version
> -of `autoconf'.
> -
> -   The simplest way to compile this package is:
> -
> -  1. `cd' to the directory containing the package's source code and type
> -     `./configure' to configure the package for your system.
> -
> -     Running `configure' might take a while.  While running, it prints
> -     some messages telling which features it is checking for.
> -
> -  2. Type `make' to compile the package.
> -
> -  3. Optionally, type `make check' to run any self-tests that come with
> -     the package, generally using the just-built uninstalled binaries.
> -
> -  4. Type `make install' to install the programs and any data files and
> -     documentation.  When installing into a prefix owned by root, it is
> -     recommended that the package be configured and built as a regular
> -     user, and only the `make install' phase executed with root
> -     privileges.
> -
> -  5. Optionally, type `make installcheck' to repeat any self-tests, but
> -     this time using the binaries in their final installed location.
> -     This target does not install anything.  Running this target as a
> -     regular user, particularly if the prior `make install' required
> -     root privileges, verifies that the installation completed
> -     correctly.
> -
> -  6. You can remove the program binaries and object files from the
> -     source code directory by typing `make clean'.  To also remove the
> -     files that `configure' created (so you can compile the package for
> -     a different kind of computer), type `make distclean'.  There is
> -     also a `make maintainer-clean' target, but that is intended mainly
> -     for the package's developers.  If you use it, you may have to get
> -     all sorts of other programs in order to regenerate files that came
> -     with the distribution.
> -
> -  7. Often, you can also type `make uninstall' to remove the installed
> -     files again.  In practice, not all packages have tested that
> -     uninstallation works correctly, even though it is required by the
> -     GNU Coding Standards.
> -
> -  8. Some packages, particularly those that use Automake, provide `make
> -     distcheck', which can by used by developers to test that all other
> -     targets like `make install' and `make uninstall' work correctly.
> -     This target is generally not run by end users.
> -
> -Compilers and Options
> -=====================
> -
> -   Some systems require unusual options for compilation or linking that
> -the `configure' script does not know about.  Run `./configure --help'
> -for details on some of the pertinent environment variables.
> -
> -   You can give `configure' initial values for configuration parameters
> -by setting variables in the command line or in the environment.  Here
> -is an example:
> -
> -     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
> -
> -   *Note Defining Variables::, for more details.
> -
> -Compiling For Multiple Architectures
> -====================================
> -
> -   You can compile the package for more than one kind of computer at the
> -same time, by placing the object files for each architecture in their
> -own directory.  To do this, you can use GNU `make'.  `cd' to the
> -directory where you want the object files and executables to go and run
> -the `configure' script.  `configure' automatically checks for the
> -source code in the directory that `configure' is in and in `..'.  This
> -is known as a "VPATH" build.
> -
> -   With a non-GNU `make', it is safer to compile the package for one
> -architecture at a time in the source code directory.  After you have
> -installed the package for one architecture, use `make distclean' before
> -reconfiguring for another architecture.
> -
> -   On MacOS X 10.5 and later systems, you can create libraries and
> -executables that work on multiple system types--known as "fat" or
> -"universal" binaries--by specifying multiple `-arch' options to the
> -compiler but only a single `-arch' option to the preprocessor.  Like
> -this:
> -
> -     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
> -                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
> -                 CPP="gcc -E" CXXCPP="g++ -E"
> -
> -   This is not guaranteed to produce working output in all cases, you
> -may have to build one architecture at a time and combine the results
> -using the `lipo' tool if you have problems.
> -
> -Installation Names
> -==================
> -
> -   By default, `make install' installs the package's commands under
> -`/usr/local/bin', include files under `/usr/local/include', etc.  You
> -can specify an installation prefix other than `/usr/local' by giving
> -`configure' the option `--prefix=PREFIX', where PREFIX must be an
> -absolute file name.
> -
> -   You can specify separate installation prefixes for
> -architecture-specific files and architecture-independent files.  If you
> -pass the option `--exec-prefix=PREFIX' to `configure', the package uses
> -PREFIX as the prefix for installing programs and libraries.
> -Documentation and other data files still use the regular prefix.
> -
> -   In addition, if you use an unusual directory layout you can give
> -options like `--bindir=DIR' to specify different values for particular
> -kinds of files.  Run `configure --help' for a list of the directories
> -you can set and what kinds of files go in them.  In general, the
> -default for these options is expressed in terms of `${prefix}', so that
> -specifying just `--prefix' will affect all of the other directory
> -specifications that were not explicitly provided.
> -
> -   The most portable way to affect installation locations is to pass the
> -correct locations to `configure'; however, many packages provide one or
> -both of the following shortcuts of passing variable assignments to the
> -`make install' command line to change installation locations without
> -having to reconfigure or recompile.
> -
> -   The first method involves providing an override variable for each
> -affected directory.  For example, `make install
> -prefix=/alternate/directory' will choose an alternate location for all
> -directory configuration variables that were expressed in terms of
> -`${prefix}'.  Any directories that were specified during `configure',
> -but not in terms of `${prefix}', must each be overridden at install
> -time for the entire installation to be relocated.  The approach of
> -makefile variable overrides for each directory variable is required by
> -the GNU Coding Standards, and ideally causes no recompilation.
> -However, some platforms have known limitations with the semantics of
> -shared libraries that end up requiring recompilation when using this
> -method, particularly noticeable in packages that use GNU Libtool.
> -
> -   The second method involves providing the `DESTDIR' variable.  For
> -example, `make install DESTDIR=/alternate/directory' will prepend
> -`/alternate/directory' before all installation names.  The approach of
> -`DESTDIR' overrides is not required by the GNU Coding Standards, and
> -does not work on platforms that have drive letters.  On the other hand,
> -it does better at avoiding recompilation issues, and works well even
> -when some directory options were not specified in terms of `${prefix}'
> -at `configure' time.
> -
> -Optional Features
> -=================
> -
> -   If the package supports it, you can cause programs to be installed
> -with an extra prefix or suffix on their names by giving `configure' the
> -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
> -
> -   Some packages pay attention to `--enable-FEATURE' options to
> -`configure', where FEATURE indicates an optional part of the package.
> -They may also pay attention to `--with-PACKAGE' options, where PACKAGE
> -is something like `gnu-as' or `x' (for the X Window System).  The
> -`README' should mention any `--enable-' and `--with-' options that the
> -package recognizes.
> -
> -   For packages that use the X Window System, `configure' can usually
> -find the X include and library files automatically, but if it doesn't,
> -you can use the `configure' options `--x-includes=DIR' and
> -`--x-libraries=DIR' to specify their locations.
> -
> -   Some packages offer the ability to configure how verbose the
> -execution of `make' will be.  For these packages, running `./configure
> ---enable-silent-rules' sets the default to minimal output, which can be
> -overridden with `make V=1'; while running `./configure
> ---disable-silent-rules' sets the default to verbose, which can be
> -overridden with `make V=0'.
> -
> -Particular systems
> -==================
> -
> -   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
> -CC is not installed, it is recommended to use the following options in
> -order to use an ANSI C compiler:
> -
> -     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
> -
> -and if that doesn't work, install pre-built binaries of GCC for HP-UX.
> -
> -   HP-UX `make' updates targets which have the same time stamps as
> -their prerequisites, which makes it generally unusable when shipped
> -generated files such as `configure' are involved.  Use GNU `make'
> -instead.
> -
> -   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
> -parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
> -a workaround.  If GNU CC is not installed, it is therefore recommended
> -to try
> -
> -     ./configure CC="cc"
> -
> -and if that doesn't work, try
> -
> -     ./configure CC="cc -nodtk"
> -
> -   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
> -directory contains several dysfunctional programs; working variants of
> -these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
> -in your `PATH', put it _after_ `/usr/bin'.
> -
> -   On Haiku, software installed for all users goes in `/boot/common',
> -not `/usr/local'.  It is recommended to use the following options:
> -
> -     ./configure --prefix=/boot/common
> -
> -Specifying the System Type
> -==========================
> -
> -   There may be some features `configure' cannot figure out
> -automatically, but needs to determine by the type of machine the package
> -will run on.  Usually, assuming the package is built to be run on the
> -_same_ architectures, `configure' can figure that out, but if it prints
> -a message saying it cannot guess the machine type, give it the
> -`--build=TYPE' option.  TYPE can either be a short name for the system
> -type, such as `sun4', or a canonical name which has the form:
> -
> -     CPU-COMPANY-SYSTEM
> -
> -where SYSTEM can have one of these forms:
> -
> -     OS
> -     KERNEL-OS
> -
> -   See the file `config.sub' for the possible values of each field.  If
> -`config.sub' isn't included in this package, then this package doesn't
> -need to know the machine type.
> -
> -   If you are _building_ compiler tools for cross-compiling, you should
> -use the option `--target=TYPE' to select the type of system they will
> -produce code for.
> -
> -   If you want to _use_ a cross compiler, that generates code for a
> -platform different from the build platform, you should specify the
> -"host" platform (i.e., that on which the generated programs will
> -eventually be run) with `--host=TYPE'.
> -
> -Sharing Defaults
> -================
> -
> -   If you want to set default values for `configure' scripts to share,
> -you can create a site shell script called `config.site' that gives
> -default values for variables like `CC', `cache_file', and `prefix'.
> -`configure' looks for `PREFIX/share/config.site' if it exists, then
> -`PREFIX/etc/config.site' if it exists.  Or, you can set the
> -`CONFIG_SITE' environment variable to the location of the site script.
> -A warning: not all `configure' scripts look for a site script.
> -
> -Defining Variables
> -==================
> -
> -   Variables not defined in a site shell script can be set in the
> -environment passed to `configure'.  However, some packages may run
> -configure again during the build, and the customized values of these
> -variables may be lost.  In order to avoid this problem, you should set
> -them in the `configure' command line, using `VAR=value'.  For example:
> -
> -     ./configure CC=/usr/local2/bin/gcc
> -
> -causes the specified `gcc' to be used as the C compiler (unless it is
> -overridden in the site shell script).
> -
> -Unfortunately, this technique does not work for `CONFIG_SHELL' due to
> -an Autoconf limitation.  Until the limitation is lifted, you can use
> -this workaround:
> -
> -     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
> -
> -`configure' Invocation
> -======================
> -
> -   `configure' recognizes the following options to control how it
> -operates.
> -
> -`--help'
> -`-h'
> -     Print a summary of all of the options to `configure', and exit.
> -
> -`--help=short'
> -`--help=recursive'
> -     Print a summary of the options unique to this package's
> -     `configure', and exit.  The `short' variant lists options used
> -     only in the top level, while the `recursive' variant lists options
> -     also present in any nested packages.
> -
> -`--version'
> -`-V'
> -     Print the version of Autoconf used to generate the `configure'
> -     script, and exit.
> -
> -`--cache-file=FILE'
> -     Enable the cache: use and save the results of the tests in FILE,
> -     traditionally `config.cache'.  FILE defaults to `/dev/null' to
> -     disable caching.
> -
> -`--config-cache'
> -`-C'
> -     Alias for `--cache-file=config.cache'.
> -
> -`--quiet'
> -`--silent'
> -`-q'
> -     Do not print messages saying which checks are being made.  To
> -     suppress all normal output, redirect it to `/dev/null' (any error
> -     messages will still be shown).
> -
> -`--srcdir=DIR'
> -     Look for the package's source code in directory DIR.  Usually
> -     `configure' can determine that directory automatically.
> -
> -`--prefix=DIR'
> -     Use DIR as the installation prefix.  *note Installation Names::
> -     for more details, including other options available for fine-tuning
> -     the installation locations.
> -
> -`--no-create'
> -`-n'
> -     Run the configure checks, but stop before creating any output
> -     files.
> -
> -`configure' also accepts some other, not widely useful, options.  Run
> -`configure --help' for more details.
> diff --git a/Makefile.am b/Makefile.am
> deleted file mode 100644
> index fbbc2559..00000000
> --- a/Makefile.am
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -SUBDIRS = lib/libalpm src/util src/pacman scripts etc test/pacman test/util test/scripts
> -if WANT_DOC
> -SUBDIRS += doc
> -endif
> -
> -DIST_SUBDIRS = $(SUBDIRS) src/common
> -
> -ACLOCAL_AMFLAGS = -I m4 --install
> -AM_MAKEFLAGS = --no-print-directory
> -
> -# Make sure we test and build manpages when doing distcheck
> -DISTCHECK_CONFIGURE_FLAGS = --enable-doc --disable-git-version \
> -               bashcompdir='$${prefix}/share/bash-completion/completions'
> -
> -# Some files automatically included, so they aren't specified below:
> -#   AUTHORS, COPYING, NEWS, README
> -EXTRA_DIST = \
> -       HACKING test/tap.sh \
> -       meson.build meson_options.txt \
> -       build-aux/edit-script.sh.in \
> -       build-aux/meson-make-symlink.sh \
> -       build-aux/script-wrapper.sh.in
> -
> -
> -# Sample makepkg prototype files
> -pkgdatadir = ${datadir}/${PACKAGE}
> -dist_pkgdata_DATA = \
> -       proto/PKGBUILD.proto \
> -       proto/PKGBUILD-split.proto \
> -       proto/PKGBUILD-vcs.proto \
> -       proto/proto.install
> -
> -$(top_srcdir)/test/pacman/tests/TESTS: $(wildcard test/pacman/tests/*.py)
> -       @printf "TESTS += %s\n" $^ | LC_ALL=C sort -u > "$@"
> -
> -TESTS =  test/scripts/parseopts_test.sh \
> -                                test/scripts/makepkg-template_test.sh \
> -                                test/scripts/pacman-db-upgrade-v9.py \
> -                                test/util/vercmptest.sh
> -include $(top_srcdir)/test/pacman/tests/TESTS
> -
> -TEST_SUITE_LOG = test/test-suite.log
> -TEST_EXTENSIONS = .py
> -AM_TESTS_ENVIRONMENT = \
> -       PMTEST_UTIL_DIR=$(top_builddir)/src/util/; export PMTEST_UTIL_DIR; \
> -       PMTEST_SCRIPT_DIR=$(top_builddir)/scripts/; export PMTEST_SCRIPT_DIR; \
> -       PMTEST_SCRIPTLIB_DIR=$(top_srcdir)/scripts/library/; export PMTEST_SCRIPTLIB_DIR; \
> -       PMTEST_LIBMAKEPKG_DIR=$(top_builddir)/scripts/libmakepkg/; export PMTEST_LIBMAKEPKG_DIR;
> -LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
> -                                                                $(top_srcdir)/build-aux/tap-driver.sh
> -PY_LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \
> -                                                                $(top_srcdir)/build-aux/tap-driver.sh
> -PY_LOG_COMPILER = $(PYTHON) $(top_srcdir)/test/pacman/pactest.py
> -AM_PY_LOG_FLAGS = \
> -               --scriptlet-shell $(SCRIPTLET_SHELL) \
> -               --ldconfig $(LDCONFIG) \
> -               --bindir $(top_builddir)/src/pacman \
> -               --bindir $(top_builddir)/scripts
> -if !HAVE_LIBGPGME
> -AM_PY_LOG_FLAGS += --without-gpg
> -endif
> -if !HAVE_LIBCURL
> -AM_PY_LOG_FLAGS += --without-curl
> -endif
> -
> -# create the pacman DB, cache, makepkg-template and system hook directories upon install
> -install-data-local:
> -       for dir in "$(DESTDIR)$(localstatedir)/lib/pacman" "$(DESTDIR)$(localstatedir)/cache/pacman/pkg" \
> -                  "$(DESTDIR)$(datarootdir)/makepkg-template" "$(DESTDIR)$(datarootdir)/libalpm/hooks"; do \
> -         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
> -       done
> -
> -update-po:
> -       $(MAKE) -C lib/libalpm/po update-po
> -       $(MAKE) -C scripts/po update-po
> -       $(MAKE) -C src/pacman/po update-po
> -
> -.PHONY: update-po
> diff --git a/RELEASE b/RELEASE
> index 7a9184b4..1ce462fd 100644
> --- a/RELEASE
> +++ b/RELEASE
> @@ -1,22 +1,21 @@
>  The following checklist should be used for making a pacman release.
>
> -- Ensure "make distcheck" succeeds
> +- Ensure "ninja dist" succeeds
>  - Call a freeze to development.
>  - Send translation updates to Transifex at least two weeks before a major
>    release (see below).  At this stage, strings can only be changed for a
>    major issue.
>  - Update NEWS and README files
>  - Pull translation updates from Transifex
> -- Update version in configure.ac as described in file
> +- Update version in meson.build as described in file
>  - Update doc/index.asciidoc
>  - Create a signed git tag (git tag -s vX.Y.Z -m "commit message")
> -- Create and sign release tarballs (generate with "make distcheck")
> -  - In addition to the standard autotools toolchain, autoconf-archive is needed
> +- Create and sign release tarballs (generate with "ninja dist")
>  - Update pacman website
>
>  Transifex updates are handled using the transifex client. The basic process is:
>  - Pull updates from transifex ("tx pull -a -f --minimum-perc 75")
> -- Update po files ("make update-po")
> +- Update po files ("./build-aux/update-po")
>  - Fix all translation errors found
>  - Add any new locales to the relevant LINGUAS file
>  - Optional: Make any manual changes needed (e.g. fixing spacing in a string)
> diff --git a/configure.ac b/configure.ac
> deleted file mode 100644
> index 9db39232..00000000
> --- a/configure.ac
> +++ /dev/null
> @@ -1,594 +0,0 @@
> -#                                               -*- Autoconf -*-
> -# Process this file with autoconf to produce a configure script.
> -# Minimum version of autoconf required
> -AC_PREREQ(2.64)
> -
> -# UPDATING VERSION NUMBERS FOR RELEASES
> -#
> -# libalpm:
> -# current
> -#   The most recent interface number that this library implements.
> -# revision
> -#   The implementation number of the current interface.
> -# age
> -#   The difference between the newest and oldest interfaces that this library
> -#   implements. In other words, the library implements all the interface
> -#   numbers in the range from number current - age to current.
> -#
> -# 1. Start with version information of `0:0:0' for each libtool library.
> -# 2. Update the version information only immediately before a public release of
> -#    your software. More frequent updates are unnecessary, and only guarantee
> -#    that the current interface number gets larger faster.
> -# 3. If the library source code has changed at all since the last update, then
> -#    increment revision (`c:r:a' becomes `c:r+1:a').
> -# 4. If any interfaces have been added, removed, or changed since the last
> -#    update, increment current, and set revision to 0.
> -# 5. If any interfaces have been added since the last public release, then
> -#    increment age.
> -# 6. If any interfaces have been removed since the last public release, then
> -#    set age to 0.
> -#
> -# pacman:
> -#   Extreme huge major changes:
> -#     pacman_version_major += 1
> -#     pacman_version_minor = 0
> -#     pacman_version_micro = 0
> -#
> -#   Real releases:
> -#     pacman_version_minor += 1
> -#     pacman_version_micro = 0
> -#
> -#   Bugfix releases:
> -#     pacman_version_micro += 1
> -
> -m4_define([lib_current], [12])
> -m4_define([lib_revision], [1])
> -m4_define([lib_age], [0])
> -
> -m4_define([pacman_version_major], [5])
> -m4_define([pacman_version_minor], [2])
> -m4_define([pacman_version_micro], [1])
> -m4_define([pacman_version],
> -          [pacman_version_major.pacman_version_minor.pacman_version_micro])
> -
> -# Autoconf initialization
> -AC_INIT([pacman], [pacman_version], [pacman-dev@archlinux.org])
> -AC_CONFIG_SRCDIR([config.h.in])
> -AC_CONFIG_HEADERS([config.h])
> -AC_CONFIG_MACRO_DIR([m4])
> -AC_CONFIG_AUX_DIR([build-aux])
> -AC_REQUIRE_AUX_FILE([tap-driver.sh])
> -
> -AC_CANONICAL_HOST
> -AM_INIT_AUTOMAKE([1.11 foreign])
> -AM_SILENT_RULES([yes])
> -
> -LT_INIT
> -LIB_VERSION=`expr lib_current - lib_age`.lib_age.lib_revision
> -LIB_VERSION_INFO="lib_current:lib_revision:lib_age"
> -
> -# Respect empty CFLAGS during compiler tests
> -if test "x$CFLAGS" = "x"; then
> -  CFLAGS=""
> -fi
> -
> -# Set substitution values for version stuff in Makefiles and anywhere else,
> -# and put LIB_VERSION in config.h
> -AC_SUBST(LIB_VERSION)
> -AC_SUBST(LIB_VERSION_INFO)
> -AC_DEFINE_UNQUOTED([LIB_VERSION], ["$LIB_VERSION"], [libalpm version number])
> -
> -# Help line for root directory
> -AC_ARG_WITH(root-dir,
> -       AS_HELP_STRING([--with-root-dir=path], [set the location of the root operating directory]),
> -       [ROOTDIR=$withval], [ROOTDIR=/])
> -
> -# Help line for package extension
> -AC_ARG_WITH(pkg-ext,
> -       AS_HELP_STRING([--with-pkg-ext=ext], [set the file extension used by packages]),
> -       [PKGEXT=$withval], [PKGEXT=.pkg.tar.gz])
> -
> -# Help line for source package directory
> -AC_ARG_WITH(src-ext,
> -       AS_HELP_STRING([--with-src-ext=ext], [set the file extension used by source packages]),
> -       [SRCEXT=$withval], [SRCEXT=.src.tar.gz])
> -
> -# Help line for buildscript filename
> -AC_ARG_WITH(buildscript,
> -       AS_HELP_STRING([--with-buildscript=name], [set the build script name used by makepkg]),
> -       [BUILDSCRIPT=$withval], [BUILDSCRIPT=PKGBUILD])
> -
> -# Help line for buildscript filename
> -AC_ARG_WITH(makepkg-template-dir,
> -       AS_HELP_STRING([--with-makepkg-template-dir=name], [set the template dir used by makepkg-template]),
> -       [TEMPLATE_DIR=$withval], [TEMPLATE_DIR=${datarootdir}/makepkg-template])
> -
> -# Help line for debug package suffix
> -AC_ARG_WITH(debug-suffix,
> -       AS_HELP_STRING([--with-debug-suffix=name], [set the suffix for split debugging symbol packages used by makepkg]),
> -       [DEBUGSUFFIX=$withval], [DEBUGSUFFIX=debug])
> -
> -# Help line for changing shell used to run install scriptlets
> -AC_ARG_WITH(scriptlet-shell,
> -       AS_HELP_STRING([--with-scriptlet-shell=shell],
> -               [set the full path to the shell used to run install scriptlets]),
> -       [SCRIPTLET_SHELL=$withval], [SCRIPTLET_SHELL=/bin/sh])
> -
> -# Help line for ldconfig path
> -AC_ARG_WITH(ldconfig,
> -       AS_HELP_STRING([--with-ldconfig=path],
> -               [set the full path to ldconfig]),
> -       [LDCONFIG=$withval], [LDCONFIG=/sbin/ldconfig])
> -
> -# Help line for determining whether file is seccomp-enabled
> -AC_ARG_WITH(file-seccomp,
> -       AS_HELP_STRING([--with-file-seccomp={yes|no|auto}],
> -               [determine whether file is seccomp-enabled @<:@default=auto@:>@]),
> -       [with_file_seccomp=$withval], [with_file_seccomp=auto])
> -
> -# Help line for selecting a crypto library
> -AC_ARG_WITH(crypto,
> -       AS_HELP_STRING([--with-crypto={openssl|nettle}],
> -               [select crypto implementation @<:@default=openssl@:>@]),
> -       [with_crypto=$withval], [with_crypto=openssl])
> -
> -# Help line for using gpgme
> -AC_ARG_WITH(gpgme,
> -       AS_HELP_STRING([--with-gpgme], [use GPGME for PGP signature verification]),
> -       [], [with_gpgme=check])
> -
> -# Help line for using libcurl
> -AC_ARG_WITH(libcurl,
> -       AS_HELP_STRING([--with-libcurl], [use libcurl for the internal downloader]),
> -       [], [with_libcurl=check])
> -
> -# Help line for documentation
> -AC_ARG_ENABLE(doc,
> -       AS_HELP_STRING([--disable-doc], [prevent make from looking at doc/ dir]),
> -       [wantdoc=$enableval], [wantdoc=yes])
> -
> -# Help line for doxygen
> -AC_ARG_ENABLE(doxygen,
> -       AS_HELP_STRING([--enable-doxygen], [build your own API docs via Doxygen]),
> -       [wantdoxygen=$enableval], [wantdoxygen=no])
> -
> -# Help line for debug
> -AC_ARG_ENABLE(debug,
> -       AS_HELP_STRING([--enable-debug], [enable debugging support]),
> -       [debug=$enableval], [debug=no])
> -
> -# Help line for compiler warning flags
> -AC_ARG_ENABLE(warningflags,
> -       AS_HELP_STRING([--enable-warningflags], [enable extra compiler warning flags]),
> -       [warningflags=$enableval], [warningflags=no])
> -
> -# Help line for using git version in pacman version string
> -AC_ARG_ENABLE(git-version,
> -       AS_HELP_STRING([--enable-git-version],
> -               [enable use of git version in version string if available]),
> -       [wantgitver=$enableval], [wantgitver=no])
> -
> -# Enable large file support if available (must be enabled before
> -# testing compilation against gpgme).
> -AC_SYS_LARGEFILE
> -
> -# Record large file flags in pkgconfig file
> -if test "$enable_largefile" != no; then
> -       if test "$ac_cv_sys_file_offset_bits" != 'no'; then
> -               LFS_CFLAGS="-D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits"
> -       fi
> -fi
> -AC_SUBST(LFS_CFLAGS)
> -
> -
> -# Checks for programs.
> -AC_PROG_AWK
> -AC_PROG_CC_C99
> -AC_PROG_INSTALL
> -AC_CHECK_PROGS([PYTHON], [python3 python], [false])
> -AC_PATH_PROGS([BASH_SHELL], [bash bash4], [false])
> -
> -# check for perl 5.10.1 (needed by makepkg-template)
> -AC_PATH_PROG([PERL],[perl])
> -AC_DEFUN([AX_PROG_PERL_VERSION],
> -       [AC_CACHE_CHECK([for Perl version $1 or later], [ax_cv_prog_perl_version],
> -               [AS_IF(["$PERL" -e 'require v$1;' >/dev/null 2>&1],
> -                       [ax_cv_prog_perl_version=yes],
> -                       [ax_cv_prog_perl_version=no])])
> -       AS_IF([test x"$ax_cv_prog_perl_version" = xyes], [$2], [$3])])
> -AX_PROG_PERL_VERSION([5.10.1], [], [AC_MSG_ERROR([perl is too old])])
> -
> -AS_IF([test "x$BASH_SHELL" = "xfalse"],
> -       AC_MSG_WARN([*** bash >= 4.4.0 is required for pacman scripts]),
> -       [bash_version_major=`$BASH_SHELL -c 'echo "${BASH_VERSINFO[[0]]}"'`
> -       bash_version_minor=`$BASH_SHELL -c 'echo "${BASH_VERSINFO[[1]]}"'`
> -       ok=yes
> -       if test "$bash_version_major" -lt 4; then
> -               ok=no
> -       fi
> -       if test "$bash_version_major" -eq 4 && test "$bash_version_minor" -lt 4; then
> -               ok=no
> -       fi
> -       if test "$ok" = "no"; then
> -               AC_MSG_ERROR([*** bash >= 4.4.0 is required for pacman scripts])
> -       fi
> -       unset bash_version_major bash_version_minor ok])
> -
> -# find installed gettext
> -AM_GNU_GETTEXT([external], [need-ngettext])
> -AM_GNU_GETTEXT_VERSION(0.13.1)
> -
> -AC_CHECK_LIB([m], [fabs], ,
> -       AC_MSG_ERROR([libm is needed to compile pacman!]))
> -
> -PKG_CHECK_VAR(bashcompdir, [bash-completion], [completionsdir], ,
> -       bashcompdir="${datarootdir}/bash-completion/completions")
> -
> -# Check for libarchive
> -PKG_CHECK_MODULES(LIBARCHIVE, [libarchive >= 3.0.0], ,
> -       AC_MSG_ERROR([*** libarchive >= 3.0.0 is needed to compile pacman!]))
> -
> -m4_pattern_forbid([^AX_COMPARE_VERSION$])
> -# Check file for seccomp
> -if test "x$with_file_seccomp" = "xauto"; then
> -       file_version="$(file --version| sed -n 's/^file-\(.*\)/\1/p')"
> -       AX_COMPARE_VERSION([$file_version], [ge], [5.38], [with_file_seccomp=yes])
> -fi
> -if test "x$with_file_seccomp" = "xyes"; then
> -       FILECMD="file -S"
> -else
> -       FILECMD="file"
> -fi
> -AC_SUBST(FILECMD)
> -
> -# Check for OpenSSL
> -have_openssl=no
> -have_nettle=no
> -if test "x$with_crypto" = "xnettle"; then
> -       AC_SUBST(pc_crypto, [nettle])
> -       PKG_CHECK_MODULES(NETTLE, [nettle],
> -               [AC_DEFINE(HAVE_LIBNETTLE, 1, [Define whether to use nettle]) have_nettle=yes], have_nettle=no)
> -       if test "x$have_nettle" = xno -a "x$with_crypto" = xnettle; then
> -               AC_MSG_ERROR([*** nettle support requested but libraries not found])
> -       fi
> -else if test "x$with_crypto" = "xopenssl"; then
> -       AC_SUBST(pc_crypto, [libcrypto])
> -       PKG_CHECK_MODULES(LIBSSL, [libcrypto],
> -               [AC_DEFINE(HAVE_LIBSSL, 1, [Define if libcrypto is available]) have_openssl=yes], have_openssl=no)
> -       if test "x$have_openssl" = xno; then
> -               AC_MSG_ERROR([*** openssl support requested but libraries not found])
> -       fi
> -else
> -       AC_MSG_ERROR([*** unknown crypto support library requested - $with_crypto])
> -fi
> -fi
> -AM_CONDITIONAL(HAVE_LIBSSL, [test "$have_openssl" = "yes"])
> -AM_CONDITIONAL(HAVE_LIBNETTLE, [test "$have_nettle" = "yes"])
> -
> -# Check for libcurl
> -have_libcurl=no
> -if test "x$with_libcurl" != "xno"; then
> -       PKG_CHECK_MODULES(LIBCURL, [libcurl >= 7.32.0],
> -               [AC_DEFINE(HAVE_LIBCURL, 1, [Define if libcurl is available]) have_libcurl=yes], have_libcurl=no)
> -       if test "x$have_libcurl" = xno -a "x$with_libcurl" = xyes; then
> -               AC_MSG_ERROR([*** libcurl >= 7.32.0 is required for internal downloader support])
> -       fi
> -fi
> -AM_CONDITIONAL(HAVE_LIBCURL, [test "$have_libcurl" = "yes"])
> -# used to generate libalpm.pc
> -if test "x$have_libcurl" = xyes; then
> -       AC_SUBST(pc_libcurl, [libcurl])
> -fi
> -
> -# Check for gpgme
> -AC_MSG_CHECKING(whether to link with libgpgme)
> -AS_IF([test "x$with_gpgme" != "xno"],
> -       [AC_MSG_RESULT([yes])],
> -       [AC_MSG_RESULT([no])])
> -
> -have_gpgme=no
> -if test "x$with_gpgme" != "xno"; then
> -       PKG_CHECK_MODULES(GPGME, [gpgme],
> -               [AC_DEFINE([HAVE_LIBGPGME], [1], [Define if gpgme should be used to provide GPG signature support.])
> -               AC_SUBST(pc_gpgme, [gpgme])
> -               have_gpgme=yes],
> -               [AM_PATH_GPGME([1.3.0],
> -                       [LIBS_save="$LIBS"
> -                       CPPFLAGS_save="$CPPFLAGS"
> -                       CFLAGS_save="$CFLAGS"
> -
> -                       LIBS="$LIBS $GPGME_LIBS"
> -                       CPPFLAGS="$CPPFLAGS $GPGME_CPPFLAGS"
> -                       CFLAGS="$CFLAGS $GPGME_CFLAGS"
> -
> -                       AC_MSG_CHECKING([for sane gpgme])
> -                       AC_LINK_IFELSE(
> -                               [AC_LANG_PROGRAM(
> -                                       [[#include <gpgme.h>]],
> -                                       [[return gpgme_check_version("1.3.0");]])],
> -                               [AC_MSG_RESULT([yes])
> -                               have_gpgme=yes
> -                               AC_DEFINE([HAVE_LIBGPGME], [1], [Define if gpgme should be used to provide GPG signature support.])
> -                               AC_SUBST(pc_gpgme_libs, ["$GPGME_LIBS"])],
> -                               [AC_MSG_RESULT([no])
> -                               have_gpgme=no
> -                               unset GPGME_LIBS
> -                               unset GPGME_CFLAGS]
> -                               AS_IF([test "x$with_gpgme" = "xyes"],
> -                                       [AC_MSG_FAILURE([*** gpgme >= 1.3.0 is needed for GPG signature support])])
> -                               )
> -
> -                       LIBS="$LIBS_save"
> -                       CPPFLAGS="$CPPFLAGS_save"
> -                       CFLAGS="$CFLAGS_save"
> -                       unset CPPFLAGS_save
> -                       unset CFLAGS_save],)])
> -fi
> -
> -AS_IF([test "x$have_gpgme" = xno -a "x$with_gpgme" = xyes],
> -       [AC_MSG_FAILURE([--with-gpgme was given, but gpgme was not found])])
> -AM_CONDITIONAL([HAVE_LIBGPGME], [test "x$have_gpgme" = "xyes"])
> -
> -# Checks for header files.
> -AC_CHECK_HEADERS([fcntl.h float.h glob.h langinfo.h libintl.h limits.h \
> -                  locale.h mntent.h netinet/in.h netinet/tcp.h \
> -                  stddef.h string.h sys/ioctl.h \
> -                  sys/mnttab.h sys/mount.h \
> -                  sys/param.h sys/statvfs.h sys/time.h sys/types.h \
> -                  sys/ucred.h syslog.h termios.h wchar.h])
> -
> -# Checks for typedefs, structures, and compiler characteristics.
> -AC_C_INLINE
> -AC_TYPE_INT64_T
> -AC_TYPE_MODE_T
> -AC_TYPE_OFF_T
> -AC_TYPE_PID_T
> -AC_TYPE_SIZE_T
> -AC_TYPE_SSIZE_T
> -AC_STRUCT_TM
> -AC_TYPE_UID_T
> -AC_STRUCT_DIRENT_D_TYPE
> -PATH_MAX_DEFINED
> -
> -# Checks for library functions.
> -AC_FUNC_FORK
> -AC_FUNC_GETMNTENT
> -AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK
> -AC_CHECK_FUNCS([dup2 getcwd getmntinfo gettimeofday memmove memset \
> -                mkdir realpath regcomp rmdir setenv setlocale strcasecmp \
> -                strchr strcspn strdup strerror strndup strnlen strrchr \
> -                strsep strstr strtol swprintf tcflush wcwidth uname])
> -AC_CHECK_MEMBERS([struct stat.st_blksize],,,[[#include <sys/stat.h>]])
> -
> -# For the diskspace code
> -FS_STATS_TYPE
> -AC_CHECK_MEMBERS([struct statvfs.f_flag],,,[[#include <sys/statvfs.h>]])
> -AC_CHECK_MEMBERS([struct statfs.f_flags],,,[[#include <sys/param.h>
> -                  #include <sys/mount.h>]])
> -
> -# Check if we can use symbol visibility support in GCC
> -GCC_VISIBILITY_CC
> -
> -# Host-dependant definitions
> -INODECMD="stat -c '%i %n'"
> -STRIP_BINARIES="--strip-all"
> -STRIP_SHARED="--strip-unneeded"
> -STRIP_STATIC="--strip-debug"
> -case "${host_os}" in
> -       *bsd*)
> -               INODECMD="stat -f '%i %N'"
> -               ;;
> -       darwin*)
> -               host_os_darwin=yes
> -               INODECMD="/usr/bin/stat -f '%i %N'"
> -               STRIP_BINARIES=""
> -               STRIP_SHARED="-S"
> -               STRIP_STATIC="-S"
> -               ;;
> -esac
> -AM_CONDITIONAL([DARWIN], test "x$host_os_darwin" = "xyes")
> -AC_SUBST(INODECMD)
> -AC_SUBST(STRIP_BINARIES)
> -AC_SUBST(STRIP_SHARED)
> -AC_SUBST(STRIP_STATIC)
> -
> -# Variables plugged into makepkg.conf
> -CARCH="${host%%-*}"
> -CHOST="${host}"
> -AC_SUBST(CARCH)
> -AC_SUBST(CHOST)
> -
> -# Check for documentation support and status
> -AC_CHECK_PROGS([ASCIIDOC], [asciidoc])
> -AC_MSG_CHECKING([for building documentation])
> -if test "x$wantdoc" = "xyes" ; then
> -       if test $ASCIIDOC ; then
> -               AC_MSG_RESULT([yes, enabled by configure])
> -       else
> -               asciidoc="(warning : asciidoc not installed)"
> -               AC_MSG_RESULT([yes $asciidoc])
> -       fi
> -       wantdoc=yes
> -else
> -       AC_MSG_RESULT([no, disabled by configure])
> -       wantdoc=no
> -fi
> -AM_CONDITIONAL(WANT_DOC, test "x$wantdoc" = "xyes")
> -
> -# Check for doxygen support and status
> -AC_CHECK_PROGS([DOXYGEN], [doxygen])
> -AC_MSG_CHECKING([for doxygen])
> -if test "x$wantdoxygen" = "xyes" ; then
> -       if test $DOXYGEN ; then
> -               AC_MSG_RESULT([yes])
> -               usedoxygen=yes
> -       else
> -               AC_MSG_RESULT([no, doxygen missing])
> -               usedoxygen=no
> -       fi
> -else
> -       AC_MSG_RESULT([no, disabled by configure])
> -       usedoxygen=no
> -fi
> -AM_CONDITIONAL(USE_DOXYGEN, test "x$usedoxygen" = "xyes")
> -
> -# Enable or disable debug code
> -AC_MSG_CHECKING(for debug mode request)
> -if test "x$debug" = "xyes" ; then
> -       AC_MSG_RESULT(yes)
> -       AC_DEFINE([PACMAN_DEBUG], , [Enable debug code])
> -       # Check for -fstack-protector availability
> -       GCC_STACK_PROTECT_LIB
> -       GCC_STACK_PROTECT_CC
> -       GCC_STACK_CLASH_PROTECTION
> -       GCC_FORTIFY_SOURCE_CC
> -       WARNING_CFLAGS="-g -Wall -Werror"
> -else
> -       AC_MSG_RESULT(no)
> -       WARNING_CFLAGS="-Wall"
> -fi
> -
> -# Enable or disable compiler warning flags
> -AC_MSG_CHECKING(for excessive compiler warning flags)
> -if test "x$warningflags" = "xyes" ; then
> -       AC_MSG_RESULT(yes)
> -       CFLAGS_ADD([-Wcast-align], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wclobbered], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wempty-body], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wfloat-equal], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wformat-nonliteral], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wformat-security], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wignored-qualifiers], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wimplicit-fallthrough], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Winit-self], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wlogical-op], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wmissing-declarations], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wmissing-field-initializers], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wmissing-parameter-type], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wmissing-prototypes], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wold-style-declaration], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Woverride-init], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wpointer-arith], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wredundant-decls], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wshadow], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wsign-compare], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wstrict-aliasing], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wstrict-overflow=5], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wstrict-prototypes], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wtype-limits], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wuninitialized], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wunused-but-set-parameter], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wunused-parameter], [WARNING_CFLAGS])
> -       CFLAGS_ADD([-Wwrite-strings], [WARNING_CFLAGS])
> -else
> -       AC_MSG_RESULT(no)
> -fi
> -
> -# Enable or disable use of git version in pacman version string
> -AC_MSG_CHECKING(whether to use git version if available)
> -if test "x$wantgitver" = "xyes" ; then
> -       AC_CHECK_PROGS([GIT], [git])
> -       AC_CHECK_FILE([.git/], hasgitdir=yes)
> -       usegitver=$ac_cv_file__git_
> -       if test $GIT -a "x$hasgitdir" = "xyes"; then
> -               AC_DEFINE([USE_GIT_VERSION], , [Use GIT version in version string])
> -       fi
> -else
> -       AC_MSG_RESULT([no, disabled by configure])
> -       usegitver=no
> -fi
> -AM_CONDITIONAL(USE_GIT_VERSION, test "x$usegitver" = "xyes")
> -
> -# Set root directory
> -AC_SUBST(ROOTDIR)
> -AC_DEFINE_UNQUOTED([ROOTDIR], "$ROOTDIR", [The location of the root operating directory])
> -# Set package file extension
> -AC_SUBST(PKGEXT)
> -AC_DEFINE_UNQUOTED([PKGEXT], "$PKGEXT", [The file extension used by pacman packages])
> -# Set source package file extension
> -AC_SUBST(SRCEXT)
> -AC_DEFINE_UNQUOTED([SRCEXT], "$SRCEXT", [The file extension used by pacman source packages])
> -# Set makepkg build script name
> -AC_SUBST(BUILDSCRIPT)
> -AC_DEFINE_UNQUOTED([BUILDSCRIPT], "$BUILDSCRIPT", [The build script name used by makepkg])
> -# Set makepkg-template template directory
> -AC_SUBST(TEMPLATE_DIR)
> -AC_DEFINE_UNQUOTED([TEMPLATE_DIR], "$TEMPLATE_DIR", [The template directory used by makepkg-teplate])
> -# Set makepkg split debugging symbol package suffix
> -AC_SUBST(DEBUGSUFFIX)
> -AC_DEFINE_UNQUOTED([DEBUGSUFFIX], "$DEBUGSUFFIX", [The suffix for debugging symbol packages used by makepkg])
> -# Set shell used by install scriptlets
> -AC_SUBST(SCRIPTLET_SHELL)
> -AC_DEFINE_UNQUOTED([SCRIPTLET_SHELL], "$SCRIPTLET_SHELL", [The full path of the shell used to run install scriptlets])
> -# Set ldconfig path
> -AC_SUBST(LDCONFIG)
> -AC_DEFINE_UNQUOTED([LDCONFIG], "$LDCONFIG", [The full path to ldconfig])
> -
> -
> -# Configuration files
> -AC_CONFIG_FILES([
> -lib/libalpm/Makefile
> -lib/libalpm/po/Makefile.in
> -lib/libalpm/libalpm.pc
> -src/common/Makefile
> -src/pacman/Makefile
> -src/pacman/po/Makefile.in
> -src/util/Makefile
> -scripts/Makefile
> -scripts/po/Makefile.in
> -doc/Makefile
> -etc/Makefile
> -test/pacman/Makefile
> -test/pacman/tests/Makefile
> -test/scripts/Makefile
> -test/util/Makefile
> -Makefile
> -])
> -AC_OUTPUT
> -
> -echo "
> -${PACKAGE_NAME}:
> -
> -  Build information:
> -    source code location   : ${srcdir}
> -    prefix                 : ${prefix}
> -    sysconfdir             : $(eval echo ${sysconfdir})
> -       conf file           : $(eval echo ${sysconfdir})/pacman.conf
> -    localstatedir          : $(eval echo ${localstatedir})
> -       database dir        : $(eval echo ${localstatedir})/lib/pacman/
> -       cache dir           : $(eval echo ${localstatedir})/cache/pacman/pkg/
> -
> -    compiler               : ${CC}
> -    preprocessor flags     : ${CPPFLAGS}
> -    compiler flags         : ${WARNING_CFLAGS} ${CFLAGS}
> -    library flags          : ${LIBS} ${LIBSSL_LIBS} ${NETTLE_LIBS} ${LIBARCHIVE_LIBS} ${LIBCURL_LIBS} ${GPGME_LIBS}
> -    linker flags           : ${LDFLAGS}
> -
> -    Architecture           : ${CARCH}
> -    Host Type              : ${CHOST}
> -    File inode command     : ${INODECMD}
> -    File seccomp command   : ${FILECMD}
> -
> -    libalpm version        : ${LIB_VERSION}
> -    libalpm version info   : ${LIB_VERSION_INFO}
> -    pacman version         : ${PACKAGE_VERSION}
> -    using git version      : ${usegitver}
> -
> -  Directory and file information:
> -    root working directory : ${ROOTDIR}
> -    package extension      : ${PKGEXT}
> -    source pkg extension   : ${SRCEXT}
> -    build script name      : ${BUILDSCRIPT}
> -    template directory     : ${TEMPLATE_DIR}
> -
> -  Compilation options:
> -    Use libcurl            : ${have_libcurl}
> -    Use GPGME              : ${have_gpgme}
> -    Use OpenSSL            : ${have_openssl}
> -    Use nettle             : ${have_nettle}
> -    Run make in doc/ dir   : ${wantdoc} ${asciidoc}
> -    Doxygen support        : ${usedoxygen}
> -    debug support          : ${debug}
> -    extra warning flags    : ${warningflags}
> -    use git version        : ${wantgitver}
> -"
> diff --git a/doc/Makefile.am b/doc/Makefile.am
> deleted file mode 100644
> index 4de67566..00000000
> --- a/doc/Makefile.am
> +++ /dev/null
> @@ -1,162 +0,0 @@
> -# We have to do some funny stuff here with the manpages. In order to ensure
> -# a dist tarball doesn't get put out there without manpages, we keep those
> -# files listed in EXTRA_DIST no matter what. However, we only add them to
> -# man_MANS if --enable-asciidoc and/or --enable-doxygen are used.
> -
> -MANPAGES = \
> -       alpm-hooks.5 \
> -       pacman.8 \
> -       makepkg.8 \
> -       makepkg-template.1 \
> -       repo-add.8 \
> -       vercmp.8 \
> -       pacman-key.8 \
> -       PKGBUILD.5 \
> -       makepkg.conf.5 \
> -       pacman.conf.5 \
> -       libalpm.3 \
> -       BUILDINFO.5 \
> -       pacman-conf.8
> -
> -DOXYGEN_MANS = $(wildcard man3/*.3)
> -
> -HTML_MANPAGES = $(addsuffix .html,$(MANPAGES))
> -ASCIIDOC_MANPAGES = $(addsuffix .asciidoc,$(MANPAGES))
> -
> -HTML_OTHER = \
> -       index.html \
> -       submitting-patches.html \
> -       translation-help.html \
> -       HACKING.html
> -
> -HTML_DOCS = \
> -       $(HTML_MANPAGES) \
> -       $(HTML_OTHER)
> -
> -EXTRA_DIST = \
> -       meson.build \
> -       asciidoc.conf \
> -       asciidoc-override.css \
> -       PKGBUILD-example.txt \
> -       footer.asciidoc \
> -       index.asciidoc \
> -       submitting-patches.asciidoc \
> -       translation-help.asciidoc \
> -       $(ASCIIDOC_MANPAGES) \
> -       $(MANPAGES) \
> -       $(DOXYGEN_MANS)
> -
> -# Files that should be removed, but which Automake does not know.
> -MOSTLYCLEANFILES = *.xml $(MANPAGES) $(HTML_DOCS) \
> -       pacman-hooks.5 repo-remove.8 website.tar.gz
> -
> -# Ensure manpages are fresh when building a dist tarball
> -dist-hook:
> -       $(MAKE) $(AM_MAKEFLAGS) clean
> -       $(MAKE) $(AM_MAKEFLAGS) all
> -
> -if USE_GIT_VERSION
> -GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
> -REAL_PACKAGE_VERSION = $(GIT_VERSION)
> -else
> -REAL_PACKAGE_VERSION = $(PACKAGE_VERSION)
> -endif
> -
> -man_MANS =
> -dist_man_MANS = $(MANPAGES)
> -
> -if USE_DOXYGEN
> -man_MANS += $(DOXYGEN_MANS)
> -
> -all-local: doxygen.in
> -
> -Doxyfile: Doxyfile.in
> -       sed 's,@OUTPUT_DIRECTORY@,./,' Doxyfile.in >Doxyfile
> -
> -doxygen.in: Doxyfile
> -       $(DOXYGEN) $(srcdir)/Doxyfile
> -endif
> -
> -man: $(MANPAGES)
> -html: $(HTML_DOCS)
> -
> -website: website.tar.gz
> -
> -.PHONY: html website
> -
> -website.tar.gz: html
> -       $(AM_V_GEN)bsdtar czf $@ $(HTML_DOCS) \
> -               asciidoc-override.css \
> -               -C /etc/asciidoc/stylesheets/ \
> -               asciidoc.css \
> -               -C /etc/asciidoc/javascripts/ \
> -               asciidoc.js \
> -               -C /etc/asciidoc/ \
> -               images
> -
> -pkgdatadir = ${datadir}/${PACKAGE}
> -
> -ASCIIDOC_OPTS = \
> -       -f $(srcdir)/asciidoc.conf \
> -       -a pacman_version="$(REAL_PACKAGE_VERSION)" \
> -       -a pacman_date="`date +%Y-%m-%d`" \
> -       -a srcext="$(SRCEXT)" \
> -       -a pkgext="$(PKGEXT)" \
> -       -a pkgdatadir=$(pkgdatadir) \
> -       -a localstatedir=$(localstatedir) \
> -       -a sysconfdir=$(sysconfdir) \
> -       -a datarootdir=$(datarootdir) \
> -       -a rootdir=$(ROOTDIR)
> -
> -A2X_OPTS = \
> -       --no-xmllint \
> -       -d manpage \
> -       -f manpage \
> -       --xsltproc-opts='-param man.endnotes.list.enabled 0 -param man.endnotes.are.numbered 0'
> -
> -# Generate manpages
> -%: %.asciidoc asciidoc.conf footer.asciidoc Makefile.am
> -       $(AM_V_GEN)a2x $(A2X_OPTS) --asciidoc-opts="$(ASCIIDOC_OPTS) --out-file=./$@.xml" $(srcdir)/$@.asciidoc
> -
> -# Generate HTML pages
> -%.html: %.asciidoc asciidoc.conf footer.asciidoc Makefile.am
> -       $(AM_V_GEN)asciidoc $(ASCIIDOC_OPTS) -o - $*.asciidoc | \
> -               sed -e 's/\r$$//' > $@
> -
> -HACKING.html: ../HACKING
> -       $(AM_V_GEN)asciidoc $(ASCIIDOC_OPTS) -o - ../HACKING | \
> -               sed -e 's/\r$$//' > $@
> -
> -# Customizations for certain HTML docs
> -%.html: ASCIIDOC_OPTS += -a linkcss -a toc -a icons -a max-width=960px -a stylesheet=asciidoc-override.css
> -%.8.html: ASCIIDOC_OPTS += -d manpage
> -%.5.html: ASCIIDOC_OPTS += -d manpage
> -%.3.html: ASCIIDOC_OPTS += -d manpage
> -
> -# Custom dependency rules
> -PKGBUILD.5 PKGBUILD.5.html: PKGBUILD.5.asciidoc PKGBUILD-example.txt
> -
> -# Manpages as symlinks
> -repo-remove.8: repo-add.8
> -       $(RM) repo-remove.8
> -       $(LN_S) repo-add.8 repo-remove.8
> -
> -pacman-hooks.5: alpm-hooks.5
> -       $(RM) pacman-hooks.5
> -       $(LN_S) alpm-hooks.5 pacman-hooks.5
> -
> -install-data-hook:
> -       cd $(DESTDIR)$(mandir)/man8 && \
> -               $(RM) repo-remove.8 && \
> -               ( $(LN_S) repo-add.8 repo-remove.8 || \
> -               ln repo-add.8 repo-remove.8 || \
> -               cp repo-add.8 repo-remove.8 )
> -       cd $(DESTDIR)$(mandir)/man5 && \
> -               $(RM) pacman-hooks.5 && \
> -               ( $(LN_S) alpm-hooks.5 pacman-hooks.5 || \
> -               ln alpm-hooks.5 pacman-hooks.5 || \
> -               cp alpm-hooks.5 pacman-hooks.5 )
> -
> -uninstall-hook:
> -       $(RM) $(DESTDIR)$(mandir)/man8/repo-remove.8
> -       $(RM) $(DESTDIR)$(mandir)/man5/pacman-hooks.5
> diff --git a/doc/index.asciidoc b/doc/index.asciidoc
> index ebf02c20..716ceabf 100644
> --- a/doc/index.asciidoc
> +++ b/doc/index.asciidoc
> @@ -193,11 +193,11 @@ link:https://sources.archlinux.org/other/pacman/[]. To install, download the new
>  available source tarball, unpack it in a directory, and run the three magic
>  commands:
>
> -       $ ./configure
> -       $ make
> -       # make install
> +       $ meson build
> +       $ ninja -C build
> +       # ninja -C build install
>
> -You may wish to read the options presented by `./configure --help` in order to
> +You may wish to read the options presented by `meson` in order to
>  set appropriate paths and build options that are correct for your system.
>
>  Development
> diff --git a/etc/Makefile.am b/etc/Makefile.am
> deleted file mode 100644
> index 0d4fbc07..00000000
> --- a/etc/Makefile.am
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -dist_sysconf_DATA = makepkg.conf pacman.conf
> -EXTRA_DIST = makepkg.conf.in pacman.conf.in
> -
> -# Files that should be removed, but which Automake does not know.
> -MOSTLYCLEANFILES = $(dist_sysconf_DATA)
> -
> -SED_PROCESS = \
> -       $(AM_V_GEN)$(MKDIR_P) $(dir $@) && \
> -       $(SED) \
> -       -e 's|@sysconfdir[@]|$(sysconfdir)|g' \
> -       -e 's|@localstatedir[@]|$(localstatedir)|g' \
> -       -e 's|@prefix[@]|$(prefix)|g' \
> -       -e 's|@PACKAGE_VERSION[@]|$(PACKAGE_VERSION)|g' \
> -       -e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
> -       -e 's|@PKGEXT[@]|$(PKGEXT)|g' \
> -       -e 's|@SRCEXT[@]|$(SRCEXT)|g' \
> -       -e 's|@STRIP_BINARIES[@]|$(STRIP_BINARIES)|g' \
> -       -e 's|@STRIP_SHARED[@]|$(STRIP_SHARED)|g' \
> -       -e 's|@STRIP_STATIC[@]|$(STRIP_STATIC)|g' \
> -       -e 's|@CARCH[@]|$(CARCH)|g' \
> -       -e 's|@CHOST[@]|$(CHOST)|g' \
> -       -e 's|@ARCHSWITCH[@]|$(ARCHSWITCH)|g' \
> -       -e 's|@ROOTDIR[@]|$(ROOTDIR)|g' \
> -       < $< > $@
> -
> -%.conf: %.conf.in Makefile
> -       $(SED_PROCESS)
> diff --git a/lib/libalpm/Makefile.am b/lib/libalpm/Makefile.am
> deleted file mode 100644
> index e4f83223..00000000
> --- a/lib/libalpm/Makefile.am
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -AUTOMAKE_OPTIONS = gnu
> -
> -SUBDIRS = po
> -
> -EXTRA_DIST = meson.build po/meson.build
> -
> -lib_LTLIBRARIES = libalpm.la
> -include_HEADERS = alpm_list.h alpm.h
> -
> -AM_CPPFLAGS = \
> -       -imacros $(top_builddir)/config.h \
> -       -DSYSHOOKDIR=\"@datarootdir@/libalpm/hooks/\" \
> -       -DLOCALEDIR=\"@localedir@\"
> -
> -AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS)
> -
> -if ENABLE_VISIBILITY_CC
> -if DARWIN
> -AM_CFLAGS += -fvisibility=hidden
> -else
> -AM_CFLAGS += -fvisibility=internal
> -endif
> -endif
> -
> -pkgconfigdir = $(libdir)/pkgconfig
> -pkgconfig_DATA = libalpm.pc
> -
> -libalpm_la_SOURCES = \
> -       add.h add.c \
> -       alpm.h alpm.c \
> -       alpm_list.h alpm_list.c \
> -       backup.h backup.c \
> -       base64.h base64.c \
> -       be_local.c \
> -       be_package.c \
> -       be_sync.c \
> -       conflict.h conflict.c \
> -       db.h db.c \
> -       deps.h deps.c \
> -       diskspace.h diskspace.c \
> -       dload.h dload.c \
> -       error.c \
> -       filelist.h filelist.c \
> -       graph.h graph.c \
> -       group.h group.c \
> -       handle.h handle.c \
> -       hook.h hook.c \
> -       ini.h ini.c \
> -       libarchive-compat.h \
> -       log.h log.c \
> -       package.h package.c \
> -       pkghash.h pkghash.c \
> -       rawstr.c \
> -       remove.h remove.c \
> -       signing.c signing.h \
> -       sync.h sync.c \
> -       trans.h trans.c \
> -       util.h util.c \
> -       util-common.h util-common.c \
> -       version.c
> -
> -libalpm_la_LDFLAGS = -no-undefined -version-info $(LIB_VERSION_INFO)
> -
> -libalpm_la_CFLAGS = \
> -       $(AM_CFLAGS) \
> -       $(GPGME_CFLAGS) \
> -       $(LIBARCHIVE_CFLAGS) \
> -       $(LIBCURL_CFLAGS) \
> -       $(LIBSSL_CFLAGS) \
> -       $(NETTLE_CFLAGS)
> -
> -libalpm_la_LIBADD = \
> -       $(LTLIBINTL) \
> -       $(GPGME_LIBS) \
> -       $(LIBARCHIVE_LIBS) \
> -       $(LIBCURL_LIBS) \
> -       $(LIBSSL_LIBS) \
> -       $(NETTLE_LIBS)
> diff --git a/scripts/Makefile.am b/scripts/Makefile.am
> deleted file mode 100644
> index 47455ed2..00000000
> --- a/scripts/Makefile.am
> +++ /dev/null
> @@ -1,287 +0,0 @@
> -# enforce that all scripts have a --help and --version option
> -AUTOMAKE_OPTIONS = std-options
> -AM_INSTALLCHECK_STD_OPTIONS_EXEMPT = \
> -       $(WRAPPER)
> -
> -SUBDIRS = po
> -
> -pkgconfigdir = $(datarootdir)/pkgconfig
> -pkgconfig_DATA = libmakepkg.pc
> -
> -bin_SCRIPTS = \
> -       $(OURSCRIPTS) \
> -       makepkg-template \
> -       repo-remove \
> -       repo-elephant \
> -       $(WRAPPER)
> -
> -OURSCRIPTS = \
> -       makepkg \
> -       pacman-db-upgrade \
> -       pacman-key \
> -       repo-add
> -
> -EXTRA_DIST = \
> -       meson.build \
> -       libmakepkg.pc.in \
> -       makepkg.sh.in \
> -       makepkg-template.pl.in \
> -       pacman-db-upgrade.sh.in \
> -       pacman-key.sh.in \
> -       repo-add.sh.in \
> -       wrapper.sh.in \
> -       $(COMPLETION_DIST) \
> -       $(LIBMAKEPKG_DIST) \
> -       po/meson.build
> -
> -libmakepkgdir = $(datarootdir)/makepkg
> -
> -LIBMAKEPKGDIRS = \
> -       buildenv \
> -       executable \
> -       integrity \
> -       lint_config \
> -       lint_package \
> -       lint_pkgbuild \
> -       source \
> -       tidy \
> -       util
> -
> -LIBMAKEPKG_IN = \
> -       libmakepkg/executable.sh \
> -       libmakepkg/executable/ccache.sh \
> -       libmakepkg/executable/checksum.sh \
> -       libmakepkg/executable/distcc.sh \
> -       libmakepkg/executable/fakeroot.sh \
> -       libmakepkg/executable/gpg.sh \
> -       libmakepkg/executable/gzip.sh \
> -       libmakepkg/executable/pacman.sh \
> -       libmakepkg/executable/strip.sh \
> -       libmakepkg/executable/sudo.sh \
> -       libmakepkg/executable/vcs.sh \
> -       libmakepkg/buildenv.sh \
> -       libmakepkg/buildenv/buildflags.sh \
> -       libmakepkg/buildenv/compiler.sh \
> -       libmakepkg/buildenv/debugflags.sh \
> -       libmakepkg/buildenv/makeflags.sh \
> -       libmakepkg/integrity.sh \
> -       libmakepkg/integrity/generate_checksum.sh \
> -       libmakepkg/integrity/generate_signature.sh \
> -       libmakepkg/integrity/verify_checksum.sh \
> -       libmakepkg/integrity/verify_signature.sh \
> -       libmakepkg/lint_config.sh \
> -       libmakepkg/lint_config/ext.sh \
> -       libmakepkg/lint_config/paths.sh \
> -       libmakepkg/lint_config/source_date_epoch.sh \
> -       libmakepkg/lint_config/variable.sh \
> -       libmakepkg/lint_package.sh \
> -       libmakepkg/lint_package/build_references.sh \
> -       libmakepkg/lint_package/dotfiles.sh \
> -       libmakepkg/lint_package/file_names.sh \
> -       libmakepkg/lint_package/missing_backup.sh \
> -       libmakepkg/lint_pkgbuild.sh \
> -       libmakepkg/lint_pkgbuild/arch.sh \
> -       libmakepkg/lint_pkgbuild/arch_specific.sh \
> -       libmakepkg/lint_pkgbuild/backup.sh \
> -       libmakepkg/lint_pkgbuild/changelog.sh \
> -       libmakepkg/lint_pkgbuild/checkdepends.sh \
> -       libmakepkg/lint_pkgbuild/conflicts.sh \
> -       libmakepkg/lint_pkgbuild/depends.sh \
> -       libmakepkg/lint_pkgbuild/epoch.sh \
> -       libmakepkg/lint_pkgbuild/fullpkgver.sh \
> -       libmakepkg/lint_pkgbuild/install.sh \
> -       libmakepkg/lint_pkgbuild/makedepends.sh \
> -       libmakepkg/lint_pkgbuild/optdepends.sh \
> -       libmakepkg/lint_pkgbuild/options.sh \
> -       libmakepkg/lint_pkgbuild/package_function.sh \
> -       libmakepkg/lint_pkgbuild/package_function_variable.sh \
> -       libmakepkg/lint_pkgbuild/pkgbase.sh \
> -       libmakepkg/lint_pkgbuild/pkglist.sh \
> -       libmakepkg/lint_pkgbuild/pkgname.sh \
> -       libmakepkg/lint_pkgbuild/pkgrel.sh \
> -       libmakepkg/lint_pkgbuild/pkgver.sh \
> -       libmakepkg/lint_pkgbuild/provides.sh \
> -       libmakepkg/lint_pkgbuild/source.sh \
> -       libmakepkg/lint_pkgbuild/util.sh \
> -       libmakepkg/lint_pkgbuild/variable.sh \
> -       libmakepkg/source.sh \
> -       libmakepkg/source/bzr.sh \
> -       libmakepkg/source/file.sh \
> -       libmakepkg/source/git.sh \
> -       libmakepkg/source/hg.sh \
> -       libmakepkg/source/local.sh \
> -       libmakepkg/source/svn.sh \
> -       libmakepkg/srcinfo.sh \
> -       libmakepkg/tidy.sh \
> -       libmakepkg/tidy/docs.sh \
> -       libmakepkg/tidy/emptydirs.sh \
> -       libmakepkg/tidy/libtool.sh \
> -       libmakepkg/tidy/purge.sh \
> -       libmakepkg/tidy/staticlibs.sh \
> -       libmakepkg/tidy/strip.sh \
> -       libmakepkg/tidy/zipman.sh \
> -       libmakepkg/util.sh \
> -       libmakepkg/util/compress.sh \
> -       libmakepkg/util/config.sh \
> -       libmakepkg/util/dirsize.sh \
> -       libmakepkg/util/error.sh \
> -       libmakepkg/util/message.sh \
> -       libmakepkg/util/option.sh \
> -       libmakepkg/util/parseopts.sh \
> -       libmakepkg/util/pkgbuild.sh \
> -       libmakepkg/util/schema.sh \
> -       libmakepkg/util/source.sh \
> -       libmakepkg/util/util.sh
> -
> -LIBMAKEPKG_DIST = \
> -       libmakepkg/meson.build \
> -       $(addprefix libmakepkg/, $(addsuffix /meson.build, $(LIBMAKEPKGDIRS))) \
> -       $(addsuffix .in, $(LIBMAKEPKG_IN))
> -
> -WRAPPER = \
> -       makepkg-wrapper \
> -       pacman-db-upgrade-wrapper \
> -       pacman-key-wrapper \
> -       repo-add-wrapper
> -
> -COMPLETION_IN = \
> -       completion/bash_completion \
> -       completion/zsh_completion
> -
> -COMPLETION_DIST = \
> -       $(addsuffix .in, $(COMPLETION_IN))
> -
> -# Files that should be removed, but which Automake does not know.
> -MOSTLYCLEANFILES = $(bin_SCRIPTS) $(LIBMAKEPKG_IN) $(COMPLETION_IN) libmakepkg.pc
> -
> -clean-local:
> -       $(AM_V_at)$(RM) -r .lib
> -
> -if USE_GIT_VERSION
> -GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
> -REAL_PACKAGE_VERSION = $(GIT_VERSION)
> -else
> -REAL_PACKAGE_VERSION = $(PACKAGE_VERSION)
> -endif
> -
> -#### Taken from the autoconf scripts Makefile.am ####
> -edit = sed \
> -       -e 's|@rootdir[@]|$(ROOTDIR)|g' \
> -       -e 's|@localedir[@]|$(localedir)|g' \
> -       -e 's|@sysconfdir[@]|$(sysconfdir)|g' \
> -       -e 's|@localstatedir[@]|$(localstatedir)|g' \
> -       -e 's|@libmakepkgdir[@]|$(libmakepkgdir)|g' \
> -       -e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
> -       -e 's|@prefix[@]|$(prefix)|g' \
> -       -e '1s|!/bin/bash|!$(BASH_SHELL)|g' \
> -       -e 's|@PACKAGE_VERSION[@]|$(REAL_PACKAGE_VERSION)|g' \
> -       -e 's|@PACKAGE_BUGREPORT[@]|$(PACKAGE_BUGREPORT)|g' \
> -       -e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
> -       -e 's|@BUILDSCRIPT[@]|$(BUILDSCRIPT)|g' \
> -       -e 's|@TEMPLATE_DIR[@]|$(TEMPLATE_DIR)|g' \
> -       -e 's|@DEBUGSUFFIX[@]|$(DEBUGSUFFIX)|g' \
> -       -e "s|@INODECMD[@]|$(INODECMD)|g" \
> -       -e "s|@FILECMD[@]|$(FILECMD)|g" \
> -       -e 's|@SCRIPTNAME[@]|$@|g'
> -
> -## All the scripts depend on Makefile so that they are rebuilt when the
> -## prefix etc. changes. Use chmod -w to prevent people from editing the
> -## wrong file by accident.
> -$(OURSCRIPTS): %: %.sh.in wrapper.sh.in $(LIBMAKEPKG_IN) Makefile
> -       $(AM_V_at)$(RM) $@
> -       $(AM_V_GEN)test -f $(srcdir)/$@.sh.in && $(edit) $(srcdir)/$@.sh.in >$@
> -       $(AM_V_at)chmod +x,a-w $@
> -       @$(BASH_SHELL) -O extglob -n $@
> -
> -$(LIBMAKEPKG_IN): %: %.in Makefile
> -       $(AM_V_at)$(RM) $@
> -       $(AM_V_at)$(MKDIR_P) $(dir $@)
> -       $(AM_V_GEN)test -f $(srcdir)/$@.in && $(edit) $(srcdir)/$@.in >$@
> -       $(AM_V_at)chmod a-w $@
> -       @$(BASH_SHELL) -O extglob -n $@
> -
> -$(COMPLETION_IN) libmakepkg.pc: %: %.in Makefile
> -       $(AM_V_at)$(RM) $@
> -       $(AM_V_at)$(MKDIR_P) $(dir $@)
> -       $(AM_V_GEN)$(edit) $(srcdir)/$@.in >$@
> -       $(AM_V_at)chmod a-w $@
> -
> -all-am: $(COMPLETION_IN)
> -
> -makepkg-template: \
> -       $(srcdir)/makepkg-template.pl.in \
> -       Makefile
> -
> -       $(AM_V_at)$(RM) -f makepkg-template
> -       $(AM_V_GEN)$(edit) $< > $@
> -       $(AM_V_at)chmod +x,a-w $@
> -
> -repo-remove repo-elephant: repo-add
> -       $(AM_V_at)$(RM) $@
> -       $(AM_V_at)$(LN_S) repo-add $@
> -
> -.SECONDEXPANSION:
> -$(WRAPPER): \
> -       $(srcdir)/wrapper.sh.in \
> -       $$(subst -wrapper,,$$@)
> -
> -       $(AM_V_at)$(MKDIR_P) .lib
> -       $(AM_V_at)mv -f $(subst -wrapper,,$@) .lib
> -       $(AM_V_at)$(RM) $@
> -       $(AM_V_GEN)sed \
> -               -e "s|@PWD[@]|$$(pwd)|" \
> -               -e "s|@PROGNAME[@]|$(subst -wrapper,,$@)|g" \
> -               -e '1s|!/bin/bash|!$(BASH_SHELL)|g' \
> -               $(srcdir)/wrapper.sh.in > $@
> -       $(AM_V_at)chmod +x,a-w $@
> -       $(AM_V_at)$(LN_S) $@ $(subst -wrapper,,$@)
> -
> -install-data-local:
> -       $(MKDIR_P) $(DESTDIR)$(bashcompdir)
> -       $(INSTALL_DATA) completion/bash_completion $(DESTDIR)/$(bashcompdir)/pacman
> -       for completion in makepkg pacman-key; do \
> -           $(LN_S) pacman $(DESTDIR)/$(bashcompdir)/$$completion; \
> -       done
> -       $(MKDIR_P) $(DESTDIR)$(datarootdir)/zsh/site-functions/
> -       $(INSTALL_DATA) completion/zsh_completion $(DESTDIR)$(datarootdir)/zsh/site-functions/_pacman
> -
> -uninstall-local:
> -       $(RM) $(DESTDIR)$(bashcompdir)/makepkg
> -       $(RM) $(DESTDIR)$(bashcompdir)/pacman
> -       $(RM) $(DESTDIR)$(bashcompdir)/pacman-key
> -       $(RM) $(DESTDIR)$(datarootdir)/zsh/site-functions/_pacman
> -
> -install-exec-hook:
> -       for wrapper in $(WRAPPER); do \
> -               $(RM) $(DESTDIR)$(bindir)/$${wrapper}; \
> -               $(INSTALL) .lib/$${wrapper%-wrapper} $(DESTDIR)$(bindir)/$${wrapper%-wrapper}; \
> -       done
> -       for dir in $(LIBMAKEPKGDIRS); do \
> -               $(MKDIR_P) $(DESTDIR)$(libmakepkgdir)/$$dir; \
> -       done
> -       for lib in $(LIBMAKEPKG); do \
> -               $(INSTALL) $(srcdir)/$$lib $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
> -       done
> -       for lib in $(LIBMAKEPKG_IN); do \
> -               $(INSTALL) $$lib $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
> -       done
> -       cd $(DESTDIR)$(bindir) && \
> -               $(RM) repo-elephant && \
> -               ( $(LN_S) repo-add repo-elephant || \
> -               ln repo-add repo-elephant || \
> -               cp repo-add repo-elephant )
> -       cd $(DESTDIR)$(bindir) && \
> -               $(RM) repo-remove && \
> -               ( $(LN_S) repo-add repo-remove || \
> -               ln repo-add repo-remove || \
> -               cp repo-add repo-remove )
> -
> -uninstall-hook:
> -       cd $(DESTDIR)$(bindir) && \
> -               $(RM) repo-remove repo-elephant
> -       for lib in $(LIBMAKEPKG) $(LIBMAKEPKG_IN); do \
> -               $(RM) $(DESTDIR)$(libmakepkgdir)/$${lib#libmakepkg}; \
> -       done
> -       for dir in $(LIBMAKEPKGDIRS); do \
> -               $(RM) -r $(DESTDIR)$(libmakepkgdir)/$$dir; \
> -       done
> diff --git a/src/common/Makefile.am b/src/common/Makefile.am
> deleted file mode 100644
> index 05378712..00000000
> --- a/src/common/Makefile.am
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -EXTRA_DIST = \
> -       meson.build \
> -       ini.h ini.c util-common.h util-common.c
> diff --git a/src/pacman/Makefile.am b/src/pacman/Makefile.am
> deleted file mode 100644
> index ac2f8e46..00000000
> --- a/src/pacman/Makefile.am
> +++ /dev/null
> @@ -1,69 +0,0 @@
> -SUBDIRS = po
> -
> -EXTRA_DIST = meson.build po/meson.build
> -
> -# paths set at make time
> -conffile  = ${sysconfdir}/pacman.conf
> -dbpath    = ${localstatedir}/lib/pacman/
> -gpgdir    = ${sysconfdir}/pacman.d/gnupg/
> -hookdir   = ${sysconfdir}/pacman.d/hooks/
> -cachedir  = ${localstatedir}/cache/pacman/pkg/
> -logfile   = ${localstatedir}/log/pacman.log
> -
> -bin_PROGRAMS = pacman pacman-conf
> -
> -AM_CPPFLAGS = \
> -       -imacros $(top_builddir)/config.h \
> -       -I$(top_srcdir)/lib/libalpm \
> -       -DLOCALEDIR=\"@localedir@\" \
> -       -DCONFFILE=\"$(conffile)\" \
> -       -DDBPATH=\"$(dbpath)\" \
> -       -DGPGDIR=\"$(gpgdir)\" \
> -       -DHOOKDIR=\"$(hookdir)\" \
> -       -DCACHEDIR=\"$(cachedir)\" \
> -       -DLOGFILE=\"$(logfile)\"
> -
> -AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS) \
> -       $(LIBARCHIVE_CFLAGS)
> -
> -if USE_GIT_VERSION
> -GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
> -AM_CPPFLAGS += -DGIT_VERSION=\"$(GIT_VERSION)\"
> -endif
> -
> -pacman_SOURCES = \
> -       check.h check.c \
> -       conf.h conf.c \
> -       database.c \
> -       deptest.c \
> -       files.c \
> -       ini.h ini.c \
> -       package.h package.c \
> -       pacman.h pacman.c \
> -       query.c \
> -       remove.c \
> -       sighandler.h sighandler.c \
> -       sync.c \
> -       callback.h callback.c \
> -       upgrade.c \
> -       util.h util.c \
> -       util-common.h util-common.c
> -
> -pacman_LDADD = \
> -       $(LTLIBINTL) \
> -       $(top_builddir)/lib/libalpm/.libs/libalpm.la \
> -       $(LIBARCHIVE_LIBS)
> -
> -pacman_conf_SOURCES = pacman-conf.c \
> -       util.h \
> -       util.c \
> -       ini.h \
> -       ini.c \
> -       util-common.h \
> -       util-common.c \
> -       callback.h \
> -       callback.c \
> -       conf.h \
> -       conf.c
> -
> -pacman_conf_LDADD = $(top_builddir)/lib/libalpm/.libs/libalpm.la
> diff --git a/src/util/Makefile.am b/src/util/Makefile.am
> deleted file mode 100644
> index a454f224..00000000
> --- a/src/util/Makefile.am
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -EXTRA_DIST = meson.build
> -
> -# paths set at make time
> -conffile  = ${sysconfdir}/pacman.conf
> -dbpath    = ${localstatedir}/lib/pacman/
> -gpgdir    = ${sysconfdir}/pacman.d/gnupg/
> -cachedir  = ${localstatedir}/cache/pacman/pkg/
> -
> -bin_PROGRAMS = vercmp testpkg
> -
> -AM_CPPFLAGS = \
> -       -imacros $(top_builddir)/config.h \
> -       -I$(top_srcdir)/lib/libalpm \
> -       -DLOCALEDIR=\"@localedir@\" \
> -       -DCONFFILE=\"$(conffile)\" \
> -       -DDBPATH=\"$(dbpath)\" \
> -       -DGPGDIR=\"$(gpgdir)\" \
> -       -DCACHEDIR=\"$(cachedir)\"
> -
> -AM_CFLAGS = -pedantic -D_GNU_SOURCE $(WARNING_CFLAGS) \
> -       $(LIBARCHIVE_CFLAGS)
> -
> -testpkg_SOURCES = testpkg.c
> -testpkg_LDADD = $(top_builddir)/lib/libalpm/.libs/libalpm.la
> -
> -vercmp_SOURCES = vercmp.c
> -vercmp_LDADD = $(top_builddir)/lib/libalpm/libalpm_la-version.lo
> diff --git a/test/pacman/Makefile.am b/test/pacman/Makefile.am
> deleted file mode 100644
> index d211215a..00000000
> --- a/test/pacman/Makefile.am
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -SUBDIRS = tests
> -
> -check_SCRIPTS = \
> -       pactest.py \
> -       pmdb.py \
> -       pmenv.py \
> -       pmfile.py \
> -       pmpkg.py \
> -       pmrule.py \
> -       pmtest.py \
> -       tap.py \
> -       util.py
> -
> -noinst_SCRIPTS = $(check_SCRIPTS)
> -
> -EXTRA_DIST = \
> -       meson.build \
> -       README \
> -       TODO \
> -       ChangeLog \
> -       ldconfig.stub \
> -       $(check_SCRIPTS)
> diff --git a/test/pacman/tests/Makefile.am b/test/pacman/tests/Makefile.am
> deleted file mode 100644
> index ba3d0993..00000000
> --- a/test/pacman/tests/Makefile.am
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -check_SCRIPTS = $(wildcard *.py)
> -
> -noinst_SCRIPTS = $(check_SCRIPTS)
> -
> -EXTRA_DIST = $(check_SCRIPTS)
> diff --git a/test/scripts/Makefile.am b/test/scripts/Makefile.am
> deleted file mode 100644
> index 0100bffb..00000000
> --- a/test/scripts/Makefile.am
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -check_SCRIPTS = \
> -       parseopts_test.sh \
> -       pacman-db-upgrade-v9.py \
> -       makepkg-template_test.sh
> -
> -noinst_SCRIPTS = $(check_SCRIPTS)
> -
> -EXTRA_DIST = \
> -       meson.build \
> -       $(check_SCRIPTS)
> diff --git a/test/util/Makefile.am b/test/util/Makefile.am
> deleted file mode 100644
> index a270079f..00000000
> --- a/test/util/Makefile.am
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -check_SCRIPTS = \
> -       vercmptest.sh
> -
> -noinst_SCRIPTS = $(check_SCRIPTS)
> -
> -EXTRA_DIST = \
> -       meson.build \
> -       $(check_SCRIPTS)
> --
> 2.26.2


+1

Less code is better!